3.
Pull the spring-loaded idler back and install the
belt over the deck pulley assembly
Figure 7
1. Blower pulley
2. Blower belt
4.
Position the belt cover at an angle and slide it
under the deck frame
Figure 8
1. Blower
2. Belt cover
(Figure
7).
3. Deck pulley
4. Spring-loaded idler
(Figure
8).
3. Mower frame
5.
Push down on the rear of the cover and slide it
backward under the blower.
6.
With the belt cover resting on the deck, slide it
forward until it seats under both lips on the deck
(Figure
9).
g260772
1. Blower
2. Belt cover
7.
Secure the belt cover using the knob
g242180
10
Figure 9
3. Knob
4. Deck lip
(Figure
g260774
9).