Maintenance; Recommended Maintenance Schedule(S); Inspecting The Bagger Attachment - Toro 79324 Operator's Manual

42in and 50in twin bagger for timecutter z4000 and z5000 series
Table of Contents

Advertisement

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
Before each use or daily
Before storage
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug before you do any
maintenance. Set the wire aside so that it does not accidentally contact the spark plug.
Engines can become hot when they are operating. Severe burns can occur from contacting hot surfaces.
Allow engines, especially the muffler, to cool before touching.
Debris, such as leaves, grass, or brush can catch fire. A fire in the engine area can cause personal
injury and property damage.
• Keep the engine and muffler area free of debris accumulation.
• Take care when opening the bagger cover to keep debris from falling onto the engine and muffler
area.
• Allow the machine to cool before storing it.
Inspecting the Bagger
Attachment
Service Interval: After the first 10 hours
Before storage
Inspect the bagger attachment after the first 10 hours of
operation, and monthly thereafter.
1. Check the chute, discharge tube, and the bagger top.
Replace these parts if they are cracked or broken.
2. Tighten all nuts, bolts, and screws.
Maintenance Procedure
• Inspect the bagger
• Clean the bagger
• Inspect the bagger
• Clean the bagger
3. Inspect all fasteners and latches; replace any missing
or damaged.
4. Inspect the grass bags for deterioration.
15

Advertisement

Table of Contents
loading

Table of Contents