Maytronics Dolphin Troubleshooting Manual
Hide thumbs
Also See for Dolphin:
- Operating instructions manual (178 pages) ,
- Troubleshooting manual (4 pages) ,
- User instructions (84 pages)
Advertisement
Quick Links
Dolphin Troubleshooting
Symptom
1. Cable twisting /
coils up
Climbing Wall
Models Only
Possible reason
Obstruction in pool
Gets stuck on main
drain cover
Excess cable in the
pool
Filter bag dirty
In all abovementioned
cases
Diagonal handle position
not changed
Corrective action
Remove obstruction in pool
Turn off filter and install main
drain cover ring
Remove excess cable from
the pool
Clean filter bag
Straighten cable and lay in
sun periodically
Change handle diagonal
position after each use
Straighten cable and lay in
sun periodically
Advertisement
Related Manuals for Maytronics Dolphin
Summary of Contents for Maytronics Dolphin
- Page 1 Dolphin Troubleshooting Symptom Possible reason Corrective action 1. Cable twisting / Obstruction in pool Remove obstruction in pool coils up Gets stuck on main Turn off filter and install main drain cover drain cover ring Excess cable in the Remove excess cable from...
- Page 2 Dolphin Troubleshooting Symptom Possible reason Corrective action 2. Dolphin is Foreign object stuck in Remove object from moving in circles moving parts moving parts Clogged filter bag Clean / machine wash filter Power supply wrongly Place power supply so it can...
- Page 3 Dolphin Troubleshooting Symptom Possible reason Corrective action 3. Dolphin does not Power supply wrongly Place power supply so it reach all pool areas positioned can reach all pool areas or cover the complete pool Algae on walls and floor Brush walls and floor...
- Page 4 Debris caught around impeller Untwist or remove impeller tube. Clean impeller. Trapped air Turn Dolphin upside down under water to removed trapped air Use new filter bag with holes Unsuitable PH level Check PH level between 7–7.4 Wrong brushes...
-
Page 5: Corrective Action
Dolphin Troubleshooting Symptom Possible reason Corrective action 4. Dolphin does not climb Non-climbing parameter Reprogram the remote control walls programmed in remote for climbing control Climbing Wall Models Only Models With Remote Control Only Symptom Possible reason Corrective action 5. Motors not working... - Page 6 Symptom Possible reason Corrective action 7. Dolphin will not Air caught in filter bag Turn Dolphin upside down under water submerge to release trapped air Open two inlet flaps in the bottom lid to remove dirt and/or trapped air Use new filter bag with holes...
- Page 7 Dolphin Troubleshooting Symptom Possible reason Corrective action 8. Air bubbles escaping from Dolphin climbs too high Remove handle float impeller tube or Dolphin Consult your dealer about disengaging from wall at mounting a 250g. weight to waterline bottom lid.
- Page 8 Call your Dolphin dealer Operator does not maintain Purchase or clean filter bag Dolphin Clean Dolphin Dolphin worked out of water Seals may be damaged, call your Dolphin dealer Power supply got wet Power supply could be damaged, call your Dolphin dealer...
Need help?
Do you have a question about the Dolphin and is the answer not in the manual?
Questions and answers