Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Analytic Systems VTC805MW
Summary of Contents for Analytic Systems VTC805MW
- Page 1 INSTALLATION & OPERATION MANUAL VTC805MW VOLTAGE CONVERTER An ISO9001 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA) www.analyticsystems.com...
- Page 2 Never allow battery acid to drip onto the voltage converter. Medical Equipment Notice Analytic Systems does not recommend the use of their products in life support applications where failure or malfunction of this product can be reasonable expected to cause the failure of the life support device or to significantly affect its safety or effectiveness.
- Page 3 Page intentionally left blank...
- Page 4 • Front Cover • Product Warnings and Advisories • Table of Contents • Introduction • Box Contents • Main Parts • Operation • Installation • Troubleshooting • Specifications • Warranty Copyright (2005-2017) Analytic Systems Ware (1993) Ltd. Revised - January 25, 2018...
-
Page 5: Box Contents
Introduction The VTC805MW is an 800 watt DC/DC voltage converter capable of converting a 12 or 24 VDC input into a 24 VDC nominal output to supply a load. The recently updated single board design incorporates proven switch-mode technology for unmatched efficiency and ultra-quiet operation. -
Page 6: Main Parts
Main Parts Rear Panel Input Connection: Amphenol Circular MIL-Spec GTC02R20-23S-RDS Front Panel Converter Status Connection: Output fuse: AGC 30A fuse Amphenol Circular MIL-Spec MS3112E8- Output Connection: Amphenol Circular Mil-Spec GTC02R-24-9P Chassis Top Indicator LEDs... -
Page 7: Operation
Operation The VTC805MW is designed for simple and intuitive operation. Before this unit can be into operation, it must be properly installed and connected. For more information, see Installation. To operate the Voltage Converter Connect the DC Power Source to this unit’s Input Connection. -
Page 8: Installation
Remote Control Connection This unit’s front panel is equipped with an Amphenol MS3112E8-4S Connector as a connection for an Analytic Systems remote control panel. The panel duplicates the LED indicators on Chassis Top as as well as provides a secondary ON/OFF switch. -
Page 9: Troubleshooting
Troubleshooting This unit provides LED indicators to help diagnose any problems. The following table lists the meanings of the LEDs and tips for troubleshooting the issues they indicate. OVERTEMP Indicates that the voltage converter is running too hot. The unit will shut down until it cools. There may be too many devices drawing from the converter or is it located in a poorly ventilated area. -
Page 10: Specifications
Specifications Input Nominal Voltage 12 VDC 24 VDC Actual Voltage 10-18 VDC 20-35 VDC Amps (max) 79.0 A 39.5 A Noise in Input < 50mV Peak to Peak Output Output Volts Nominal 24 VDC Float Volts 27.2 ± 0.05 VDC Output Amps 20.0 Continuous / 25 A (Peak) Output Fuse... -
Page 11: Limited Warranty
2 Years from date of manufacture for non-standard or OEM products 1 Year from date of manufacture for encapsulated products. 3. Analytic Systems will determine eligibility for warranty from the date of purchase shown on the warranty card when returned within 30 days, or... - Page 12 DESIGNED AND MANUFACTURED BY 800-668-3884 604-946-9983 sales@analyticsystems.com www.AnalyticSystems.com Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way Delta, BC V4G 1K5 | Canada Register Products Online | www.analyticsystems.com/support/warranty-registration...
Need help?
Do you have a question about the VTC805MW and is the answer not in the manual?
Questions and answers