Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Analytic Systems VTC310 Series
Summary of Contents for Analytic Systems VTC310 Series
- Page 1 VTC310 Series Voltage Converter Installation & Operation Manual...
- Page 2 Analytic Systems does not recommend the use of any of its products in direct patient care.
- Page 3 Fastenings 18-8 Stainless Weight 4.0 lb / 1.8 kg designed and manufactured by: ANALYTIC SYSTEMS WARE (1993) LTD. #207 12448 82 Ave. Surrey, B.C., V3W 3E9, Canada phone (604) 543-7378 fax (604) 543-7354 toll free 800-668-3884 US/Canada email: info@analyticsystems.com; web site: www.analyticsystems.com Rev.
- Page 4 INSTALLATION MOUNTING Mount the unit in a DRY location. Allow at least 4 inches of clearance around it for adequate cooling. POWER CONNECTION The unit is supplied with 3 foot power leads. This should normally be adequate to connect to a source of power.
- Page 5 OPERATION Turn the switch on the top of the unit on to energize the outputs. The green ‘Output On’ indicator light will glow to indicate the proper operation of the unit. OUTPUT ADJUSTMENT The unit has an adjustment potentiometer to allow up to ± 0.5V adjustment of the output voltage. This potentiometer is accessed through a small hole in the top of the voltage converter.
- Page 6 Dry Contact Relay To use your dry contact output fail relay you must connect a 9-pin D connector to the unit. You must use pins one and six as is indicated on page 6 in the remote connector diagram. The relay is factory preset to fail in the closed position when the low output LED and buzzer come on.
- Page 7 REMOTE CONNECTOR This connector is located on the side of the unit. Note: All switches are electronic (solid state) not mechanical relays. REMOTE CONTROL (OPTIONAL) A remote control panel may be connected to the voltage converter using a 9-pin D-connector that attaches to the side of the voltage converter.
- Page 8 Limited Warranty The equipment manufactured by Analytic Systems Ware (1993) Ltd. (the “Warrantor”) is warranted to be free from defects in workmanship and materials under normal use and service. This warranty is in effect for 3 years from the date of purchase by the user (the “Purchaser”).
Need help?
Do you have a question about the VTC310 Series and is the answer not in the manual?
Questions and answers