Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Analytic Systems VCH10W-24
Summary of Contents for Analytic Systems VCH10W-24
- Page 1 INSTALLATION & OPERATION MANUAL VCH10W & VCH10Y VOLTAGE CONVERTER...
-
Page 2: Important & Safety Instructions
6. Never allow battery acid to drip on the voltage converter. Medical Equipment Notice Analytic Systems does not recommend the use of their products in life support applications where failure or malfunction of this product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. - Page 3 • Table of Contents • Description/Overview of product • Main Parts • Operation instructions • Mounting Instructions • Connection instructions • Options • Faults • Specifications • Warranty Copyright (2005-2016) Analytic Systems Ware (1993) Ltd. Revised - September 29, 2016...
- Page 4 Introduction The VCH10W Step Down series of Voltage Converters supply up to 10 amps continuous and 12 amps peak current at 12, 24, 36 or 48 volts from any higher voltage between 20 and 80 volts DC in an IP66 rated watertight and EMC shielded enclosure for use in automotive, heavy equipment, marine, industrial, rail or alternative energy environments.
-
Page 5: Main Parts
Main Parts Front Panel 1. Deutsch DT04-4P Input/Output connector on pigtail 2. Input Power Good LED 3. Overload LED... -
Page 6: Operation
Operation To turn the unit on, simply turn on your source of power. The Input Power LED will illuminate to indicate the presence of input power. The overload LED will illuminate if the output current exceeds the continuous rating of the unit. Installation Mounting Mount the unit and allow at least 1 inch... - Page 7 Load Share Option (D Option) Two or more units may be configured for load sharing if they are equipped with the optional output isolation diodes. The output current is reduced to the Continuous rating for units with the D option. ROHS (European) Option (E Option) Consistent with military standards, this unit is normally manufactured using lead based solder.
-
Page 8: Troubleshooting
Troubleshooting This unit has 2 LED indicators to help diagnose simple problems. INPUT POWER Indicates that power is being received by the unit If the LED is not on, check with a voltmeter that there is power at the connections. Check that the polariy is correct, Positive to Pin 1 and Negative to Pin 2. -
Page 9: Specifications
Specifications Input Voltages MODEL VCH10W(Y)-12 VCH10W(Y)-24 VCH10W(Y)-32 VCH10W(Y)-36 VCH10W(Y)-48 Input Volts 20 - 80 VDC 30 - 80 VDC 40 - 80 VDC 45 - 80 VDC 60 - 80 VDC Output Voltages Output Volts Nominal 12 VDC 24 VDC 32 VDC 36 VDC 48 VDC... - Page 10 Page intentionally left blank...
-
Page 11: Limited Warranty
2 Years from date of manufacture for non-standard or OEM products 1 Year from date of manufacture for encapsulated products. 3. Analytic Systems will determine eligibility for warranty from the date of purchase shown on the warranty card when returned within 30 days, or... - Page 12 DESIGNED AND MANUFACTURED BY 800-668-3884 604-946-9983 sales@analyticsystems.com www.AnalyticSystems.com Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way Delta, BC V4G 1K5 | Canada...
Need help?
Do you have a question about the VCH10W-24 and is the answer not in the manual?
Questions and answers