Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Analytic Systems VTC1000 Series
Summary of Contents for Analytic Systems VTC1000 Series
- Page 1 INSTALLATION & OPERATION MANUAL VTC1000 Series Voltage Converter An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA) www.analyticsystems.com...
- Page 2 Copyright (2005-2017) Analytic Systems Ware (1993) Ltd. Revised - Dec 18, 2017...
- Page 3 Never allow battery acid to drip onto the voltage converter. Medical Equipment Notice Analytic Systems does not recommend the use of their products in life support applications where failure or malfunction of this product can be reasonable expected to cause the failure of the life support device or to significantly affect its safety or effectiveness.
-
Page 4: Specifications
1.0 volts above or below the standard output voltage. An output overvoltage crowbar circuit protects devices connected to the converter. The VTC1000 Series Voltage Converter supplies either 12, 24, 32 or 48 VDC from a 110, 250 or 300 VDC power source. - Page 5 12 lbs / 5.5 kg ** Actual startup is at 22, 42, or 67Vdc Input, depending on model * Specifications subjects to change without notice. Designed and manufactured by: ANALYTIC SYSTEMS WARE (1993) LTD. 8128 River Way p. 604.946.9981 f. 604.946.9983 Delta, BC V4G 1K5 Canada tf.
-
Page 6: Installation
Installation MOUNTING Mount the unit in a DRY location. Allow at least 4 inches of clearance around it for adequate cooling. POWER CONNECTION The unit is supplied with power leads about 3 feet long. This should normally be adequate to connect to a source of power. -
Page 7: Operation
LOAD SHARE OPTION The units may be configured for load sharing if they are equipped with the optional output isolation diodes. To confirm that your unit has these diodes, use an ohmmeter to measure the resistance between the two positive output terminals. If the diodes are present the terminals will measure as not connected. -
Page 8: Remote Control Option
Remote Control Option IMPORTANT: This remote is to be used only on Voltage Converters manufactured by Analytic Systems. A remote control panel may be connected to the voltage converter using a 9-pin D-connector that attaches to the side of the voltage converter. The remote control panel and D connector are part of the remote control option. -
Page 9: Battery Backup (Optional)
Battery Backup (Optional) The Battery Backup Option allows the unit to switch to using a connected battery as a power source in the event of external power failure. The DC power output normally supplies the load while the battery is maintained at full charge by a 1A trickle charger built into the unit. -
Page 10: Troubleshooting
Troubleshooting This unit provides LED indicators and a buzzer to help diagnose any problems. The unit should sound the buzzer to alert you prior to shutting itself down. You should immediately check the indicators to determine the cause of the shutdown. OVERLOAD Indicates that the output current has exceeded the continuous rating of the unit. -
Page 11: Limited Warranty
2 Years from date of manufacture for non-standard or OEM products 1 Year from date of manufacture for encapsulated products. 3. Analytic Systems will determine eligibility for warranty from the date of purchase shown on the warranty card when returned within 30 days, or... - Page 12 DESIGNED AND MANUFACTURED BY 800-668-3884 604-946-9983 sales@analyticsystems.com www.AnalyticSystems.com Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way Delta, BC V4G 1K5 | Canada Register Products Online | www.analyticsystems.com/support/warranty-registration...
Need help?
Do you have a question about the VTC1000 Series and is the answer not in the manual?
Questions and answers