7 CSI CloudPro APP
Step 2: Connect the AC switch (if applicable) between the inverter and the grid.
Step 3: Connect the DC switch (if applicable) between the inverter and the PV string.
Step 4: Set initial protection parameters via the CSI Cloud App. If the irradiation and grid conditions meet
requirements, the inverter will normally operate.
Step 5: Observe the LED indicator to ensure that the inverter operates normally. (Refer to Tab. 2-2LED indicator
description).
7 CSI CloudPro APP
7.1 APP Introduction
The CSI CloudPro APP can establish communication connection to the inverter via the Blue-tooth, thereby achieving
near-end maintenance on the inverter. Users can use the App to view basic information, alarms and events, set
parameters, etc.
7.2 Download and Install the App
Method 1:Scan the following QR Code to download and install the App according to the prompt information.
Method 2:Download and install the App through the following application stores:
Google Play(Android)
APP Store(iOS)
7.3 Use the Local Mode to Login the App
Notice:To use the local mode, the following conditions should be met:
(1) The collector is connected to the inverter and powered on.
(2) The distance between the mobile phone and the collector should be within 5m and there is no shelter.
31 / 41