App Introduction - CanadianSolar CSI-75K-T40001-E Quick Installation Manual

LED indicator
PV connection indicator
Grid connection indicator
Communications/Maintenance
indicator
Alarm indicator
6 CSI CloudPro APP

6.1 APP Introduction

The CSI CloudPro APP can establish communication connection to the inverter via the Blue-tooth, thereby achieving near-end
maintenance on the inverter. Users can use the App to view basic information, alarms and events, set parameters, etc.
6.2 Download and Install the App
Method 1：Scan the following QR Code to download and install the App according to the prompt information.
Method 2：Download and install the App through the following application stores:
Google Play(Android)

APP Store(iOS)

6.3 Use the Local Mode to Login the App
Notice：To use the local mode, the following conditions should be met：
(1) The collector is connected to the inverter and powered on.
(2) The distance between the mobile phone and the collector should be within 5m and there is no shelter.
LED state
At least one PV string is properly connected, and the DC input
Steady green
voltage of the corresponding MPPT circuit is at least 200V.
The solar inverter disconnects from all PV strings, or the DC input
Off
voltage of all MPPT circuits is less than 200V.
Steady green The solar inverter is in grid-tied mode.
Blinking green The solar inverter is in self-test mode or wait mode.
Off The solar inverter is not in grid-tied mode.
Blinking green The solar inverter receives communication data normally
The solar inverter has not receives communication data for 10
Off
seconds.
Steady green The solar inverter is in maintenance status
Steady red A major alarm is generated.
Blinking red A minor or warning alarm is generated.
Off No alarm
Definition
15 / 18