Scope Of Delivery; Storage - CanadianSolar CSI-75K-T40001-E User Manual

3.3 Scope of Delivery

PV inverter(x1)
Bolt M10x40(x4)
FIG 3-2 Scope of supply diagram (The actual configuration in order to prevail in kind)
Note (PV connector): CSI-75K-T40001-E (x12 pairs)
CSI-100K-T4001A-E, CSI-110K-T4001A-E, CSI-120K-T4001A-E (x12 pairs)
CSI-100K-T4001B-E, CSI-110K-T4001B-E, CSI-120K-T4001B-E (x18 pairs)

3.4 Storage

The following requirements should be met when the inverters need to be stored:
Storage temperature: –40°C ~ +70°C.
Storage humidity: 0% ~ 100%RH (Non-Condensing).
The warehouse should be clean, well-ventilated, and non-corrosive gas (corrosive or flammable gases), meanwhile
should be accessible all the time.
No smoking, no illegal use of electricity and fire.
When storing inverters, do not stack more than the allowed layers to avoid damage, which number marked on the
product packaging.
Do not tilt the package or place it upside down.
Regular inspection is required during the storage.
If the inverter has been stored more than half a year, it must be checked and tested by professionals before put into
use.
8 /41
Mouinting bracket(x1set)
Screw flat head M4x8(x4)
Nut M10(x4)
PV connector
Bolt M6x30(x2)
4
Hand shank(x4)(optional)
Documents
4
3 Unpacking and Storage
it