Henry Schein Urispec Plus User Manual page 8

User manual Urispec Plus
®
in the display.
The result is shown on the display, printed out and released via the interfaces
after the measurement has been completed. After three minutes the instrument
will go to stand-by. Touching the screen will reactivate the instrument.
All user inputs are performed via the touch-screen (see 3.7. Use of the instru-
ment, page 15).
2.1.3. Safety warnings
The following safety warnings are used throughout the manual:
- DANGER: defines a danger which can result in serious injury or death.
- ATTENTION: defines a possible danger which can result in simple - mild injury.
This symbol is also used to indicate user errors which can result in malfunction
or damage to the device.
- NOTE: provides necessary additional information.
8
Manual Urispec Plus V2.01 HS USA / 04-19
®