Description Of Instrument Parts; Setting Up The Instrument - Henry Schein Urispec Plus User Manual

User manual Urispec
3.2. Description of instrument parts
C
A
Pic. 3: Front view
Actuator
1. Touch-Screen
2. Test Strip Slide
3. Printer Flap
4. Serial Interface
5. USB - Interface
6. USB - Interface
7. Mains Connection
8. On/Off Switch (I/O)
9. LAN-Interface
3.3. Setting up the instrument
Place the instrument on a hard, even surface where humidity and temperature
are fairly constant. Make sure that the instrument is allowed to acclimate to
room temperature prior to use.
Make sure that you
• Do not place the instrument near strong electromagnetic fields
• Do not place the instrument near heating plates, ovens or radiators
• Do not expose the instrument to strong light sources (i.e. direct sunlight)
12
Plus
®
B
Function
Control of equipment functions
Test strip retainer and autonomous start of analysis
Opening the printer flap for paper replacement
Connection of a computer
Connection of a computer
Connection of a keyboard or a bar code scanner
Contact for the provided power pack
Turning the equipment on and off
Connection to network (serial over LAN), not sup-
ported
Manual Urispec
H
G F E
Pic. 4: Backside view
Plus V2.01 HS USA / 04-19
®
I D