Before First Use; Contents Of Packing; Intended Use; Operation - Batavia Maxxpack BT-CCG002 Operating Instructions Manual

English
Scope of delivery
2.2
The device is designed to be used with the
rechargeable battery 2.0Ah type BT-CLB005
(Art. No.7063905) or with type 4.0 Ah
BT-CLB006 (Art. No. 7063915).
Please note that the rechargeable battery
and a charging unit are not included in
delivery.
ATTENTION! Danger of damage to the
device and battery!
If the device is operated with an unsuitable
battery, both the device and the battery may
be damaged. Only operate the device with
the specified rechargeable battery.
For charging the rechargeable battery, the
charging unit 2.4 A BT-CLC004 (7063688),
4.0 A BT-CLC003 (7063554) or 2.4 A
charger BT-CLC005 (7063907) is required.

3. Before first use

Remove the device and all additional parts
out of the packaging. Check all parts for
damage in transit and do not use a dam-
aged device. Keep packaging materials out
of reach of children. There is risk of
suffocation!

4. Contents of packing

1× Cordless caulking gun
1× Instruction manual

5. Intended use

This caulking gun is designed for dispens-
ing caulking or filling material. It is intended
for domestic use and is not designed for
commercial, trade or industrial use.
6
7063927-Cordless-Caulking-gun-Ma-2108-19.indb 6 7063927-Cordless-Caulking-gun-Ma-2108-19.indb 6

6. Operation

Press the release button (6) to the left
6.1
and pull the rack rod back by the handle
(7) to the end of the cartridge holder (1).
Put the cartridge onto the cartridge
6.2
holder.
Press the release button (6) to the left
6.3
and push the rack rod (7) forward until
it is against the back of the cartridge.
Press the release button (6) to the right
6.4
and press the trigger switch (3) until the
material within the cartridge comes out
form the nozzle of the conical
applicator.
Release the trigger switch (3) to turn off
6.5
the caulking gun. After the caulking gun
is turned off, the rack rod will automati-
cally move backward for a short dis-
tance. This prevents the overflow of
caulking material.

7. Trigger switch (variable-speed)

The caulking gun is equipped with a variable
speed trigger switch (3). The caulking gun
will turn at its slowest speed when the trig-
ger switch is squeezed lightly. The caulking
gun will turn at its fastest speed when the
trigger switch is squeezed firmly.

8. Speed regulator

The caulking gun is equipped with an
infinitely adjustable speed regulator (2). The
material's rate of flow is controlled by the
speed regulator to accommodate various
applications.
When starting work, set the speed regu-
8.1
lator to the lowest setting 1.
Turn the speed regulator in direction to
8.2
a higher setting, according to the
desired application.
If you set a faster speed at the beginning,
the sealant is drained too quickly during
operation and stacked on an application
surface.
07-09-2021 11:21 07-09-2021 11:21