Table of Contents
Advertisement
1、Make sure the hand-held
controller has switched power
off to avoid damaging the
motherboard.Also turn off the
main switch on the battery.
2、Remove the battery in the
arrow direction as shown in
the picture.
Note: The fuse holder is
located below the battery
base. Spec: 40A.
The charging socket is located
under the battery.
3、Connect the charger.
Charger hole
4、Please refer to the charger
instruction on how to use it.
Note: Use a dedicated 24V
lithium battery charger, the
output voltage is:
DC 29.4V.
Advertisement
Table of Contents
