xsto CT420SC Operation Manual page 21

3.5.3 The notes for angle adjustment of the loading board
(1) Effective range of automatic angle adjustment: 7°to 30°
When CT420SC is under automatic adjustment mode, if the horizontal
angle of the loading board is adjusted to less than 7°or more than 30°,
CT420SC will automatically adjust the angle of the loading board to
raise loading board to 7° or lower the loading board to 30°.
When CT420SC is in the manual mode, if the horizontal angle of the
loading board is adjusted between 7°and 30°and enters the automatic
mode, CT420SC will automatically adjust the angle based on the
current angle. If the loading board enters the automatic mode with an
angle greater than 30°, the loading board will be depressed to 30°(In
case of less than 7°, see the second precautions).
(2) Restore the last used auto angle
When the CT420SC switches to manual mode from automatic mode,
CT420SC will retain the horizontal included angle of loading board
during mode switching (assuming the angle is 15°).
When the CT420SC is under manual adjustment mode and the
horizontal included angle of the loading board is less than 7°. Then
switch to the automatic adjustment mode, the loading board will be
adjusted to the angle when the last automatic adjustment mode is
switched to the manual adjustment mode (the angle of the previous
Mode 2: First turn on the
automatic adjustment function
of the loading board, then
switch to tmanual load plate
adjustment mode, adjust the
load plate to the appropriate
angle by j
oystick
.