xsto CT420SC Operation Manual page 23

3.6.2 Initial position
3.6.3 At the beginning of going upstairs
Insert the 24V battery pack and
turn on the battery switch.
Note: Before turning on
the battery switch, make sure
the battery is inserted in the
battery holder and the power
cord is connected well.
Turn on the hand-held controller
switch; Click once to start the
controller screen display;
and hold again for 1 second to
shut it down.
Make sure the goods are fixed
securely, move CT420SC to the edge
of the stairs and make sure the two
tracks lean against the edge of the
first stair. Turn on loading board
automatic adjustment mode on
hand-held controller, set speed at
level 1, go upstairs by tracks.
CT420SC will walk
slowly before it finally gets off the
ground. Under loading board
automatic adjustment mode, the
process will slow down the move.
Press