Mitsubishi Electric MELSEC iQ-F Series Handbook page 76

■Changing the Program
Change the high-speed counter program by referring to the following program example.
[Example of program]
M0
C235
M0
UDCNTF
LC35
Precautions when Using the Routine Timer
When the routine timer (T192 to T199) is used with the FX3U, it will not operate just by switching to the FX5U.
The routine timer must be set by the parameter. For the setting procedure, refer to the following.
■Parameter Setting Procedure of the Routine Timer
Set the use of the routine timer and the leading device number.
[Parameter]  [FX5UCPU]  [CPU Parameter]  "Memory/Device Setting"  "Device/Label Memory Area Setting"
5 Replacement from FX3U to FX5U
74
5.4 Conversion of the Projects
K10000
C235
Y001
Change the program.
LC35 K10000
Y001