Mitsubishi Electric MELSEC iQ-F Series Handbook page 120

3.
The following display is shown.
A selection screen of the following new module type and conversion method is shown.
Select the new module type and conversion method, and press the [Execute] button.
• The display contents may vary depending on the version of the software.
• Precautions for the converted project are displayed. Please read carefully through the contents before use.
4.
When conversion is completed, the following message is shown.
5.
Check the contents of the model change result in the "Output window".
APPX
118
Appendix 5 Conversion of the SFC Program
Output window