Mitsubishi Electric MELSEC iQ-F Series Handbook page 54

Extension device
Device name Model name
Extension device FX3U-1PSU-5V
FX2N-4AD-TC
FX2N-4AD-PT
FX2N-5A
FX2N-2AD
FX2N-8AD
FX3U-4AD
FX2N-2LC
FX3U-4LC
FX2N-2DA
FX3U-4DA
FX2N-1HC
FX3U-2HC
FX2N-10PG
FX3U-1PG
FX3U-20SSC-H
FX2N-232IF
FX2N-32CCL
FX2N-64CL-M
FX3U-16CCL-M
FX3U-64CCL
FX3U-128ASL-M
FX3U-ENET
FX3U-64DP-M
FX3U-32DP
FX3U-CAN
FX3U-J1939
FX2N-10GM
FX2N-20GM
FX2N-1RM-SET(-E)
FX2N-32DP-IF(-D)
FX2N-64DNET
Expansion board FX3U-232-BD
FX3U-485-BD
FX3U-422-BD
FX3U-CNV-BD
FX3U-8AV-BD
FX3U-USB-BD
4 Replacement from FX3U to FX5UJ
52
4.3 Selection of Substitute Models
Recommended substitute models
Model name
FX5-1PSU-5V
FX5-4AD-TC-ADP
FX5-4AD-PT-ADP
FX5-4AD+FX5-4DA
FX5-4AD
FX5-8AD
FX5-4AD
FX5-4LC
FX5-4LC
FX5-4DA
FX5-4DA
No recommended substitute models
No recommended substitute models
FX5-20PG-D
FX5-20PG-P
FX5-40SSC-S
No recommended substitute models
FX5-CCL-MS
No recommended substitute models
FX5-CCL-MS
FX5-CCL-MS
FX5-ASL-M
No recommended substitute models
FX5-DP-M
No recommended substitute models
No recommended substitute models
No recommended substitute models
FX5-20PG-P
FX5-20PG-P
No recommended substitute models
No recommended substitute models
No recommended substitute models
FX5-232-BD
FX5-485-BD
FX5-422-BD-GOT

No recommended substitute models
No recommended substitute models
Special notes
The wiring must be replaced from the screw
terminal block to the European terminal block.
The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
The wiring must be replaced from the screw
terminal block to the spring clamp terminal block.
Replacement is necessary due to the difference of
the connector type.
The wiring must be replaced from the screw
terminal block to the external device connector.
Replacement is necessary due to the difference of
the connector type for external input connection.
One device per system.
Set to the intelligent device station in the
recommended substitute models.
Set to the master station in the recommended
substitute models.
Set to the intelligent device station in the
recommended substitute models.
Ethernet port is built into FX5UJ CPU module.
It cannot be used alone.
Replacement is necessary due to the difference of
the connector type.
It cannot be used alone.
Replacement is necessary due to the difference of
the connector type.
GOT can only be connected to FX5-422-BD-GOT.
Not necessary for FX5UJ CPU module.
USB port is built into the FX5UJ CPU module.
*1
*1