12.2 High Voltage Disconnect Switch
Install a separate disconnect switch at the out-
door unit.
For high voltage connections, flexible electrical
conduit is recommended whenever vibration
transmission may create a noise problem within
the structure.
12.3 High Voltage Ground
Ground the outdoor unit per national, state, and
local code requirements.
Section 13. Start Up
13.1 System Start Up
STEP 1 - Ensure Sections 7 through 12 have
been completed.
STEP 2 - Set System Thermostat to OFF.
18-AC127D1-1A-EN
OFF
DONE
CANCEL
13