Advertisement
Installation
Mount 2/4
Use the provided mounting template to
Note
mark wall mount holes and to drill 1 inch
center hole. For other mounting scenarios,
use the mounting template to determine
the correct hole pattern.
Feed Ethernet cable through the wall.
Leave enough slack to make
cable-sealing assembly install easier.
For a solid material like wood or metal, drill
1/8 inch pilot holes. Drive mounting screws
directly into the pilot holes.
For drywall, drill 1/4 inch holes. Insert plastic
anchors into holes and drive mounting
screws into anchors.
7
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Advertisement
