Advertisement
Installation
Adjust
Adjust your camera to the desired viewing angle. Use the online stream to confirm
image orientation. Image can be flipped 90 or 180 degrees online in Command.
70°
Secure
Remove film from the desiccant pack
adhesive strips.
Apply the adhesive side of both desiccant
packs to the recesses that say "Center
desiccant here." Ensure that no part of the
desiccant pack extends beyond the
camera body.
To secure the camera, align the top cover
security holes with the mount plate and
place the top cover back into its original
position. Tighten the security screws using
the provided screwdriver.
11
350°
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
120°
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Advertisement
