Advertisement
Installation
Grounding
In order to attach a ground cable to the camera, perform the following:
Align a 20AWG or larger grounding cable with a ring terminal and drive an M4-0.7 x
6mm screw (not included) through the terminal and into the threaded grounding point
on the back of the device.
Attach the other terminal of a grounding cable directly to a circuit breaker, ground rod
or earth ground.
This unit is powered by PoE through a UL Listed ITE.
Grounding
10
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Advertisement
