Mount The Product - SMA SUNNY HIGHPOWER PEAK3 SHP 100-21 Operating Manual

6 Mounting and Preparing the Connection
9. Thread the swivel nuts of the cable glands over the cables.
10. Attach the cable glands to the connecting plate.
11. Lead the cables through the cable glands in the connecting plate
and align the connecting plate by means of the mounting
template.
12. Remove the mounting template.

13. Mount the product .

Also see:
• Permitted and prohibited mounting positions ⇒ page 22
• Recommended clearances for mounting ⇒ page 22
• Center of gravity ⇒ page 24
6.5 Mount the product.
Danger to life due to electric shock when live cables are touched
High voltages are present on the AC and DC cables. Touching live cables results in death or lethal injuries due to
electric shock.
• Do not touch non-insulated parts or cables.
• Disconnect the AC circuit breaker and secure it against reconnection.
• Disconnect the PV array from the inverter via an external DC load-break switch (e.g. via a PV junction including
a load-break switch). Switch off and secure the DC load-break switch against reconnection.
• Ensure that all cables to be connected are de-energized.
• Wear suitable personal protective equipment for all work on the product.
26 SHPxxx-21-BE-en-10
DANGER
SMA Solar Technology AG
2
1
2
1
Operating manual