Table of Contents
Advertisement
Windows Network Installation: Model C5400n Only
Software: Novell
Installing a printer on a network is best handled by
Note:
someone familiar with networks (such as a network
Administrator).
For more detailed information on the OkiLAN®
8100e SoftNIC internal print server, see the OkiLAN
8100e SoftNIC User's Guide on the Manuals CD
supplied with your printer.
Included Network Software for
Novell
®
Your Driver CD includes the following network software:
[Oki LPR: TCP/IP only]
Admin Mgr / Quick Setup Utility
Use this to set up the various computers on your network
for use with the printer.
Storage Device Manager Utility
Load this utility to manage the hard disk drive (optional
on most models) and the printer's built-in flash memory.
[Web Driver Installer Utility: TCP/IP only]
PrintSuperVision
Provides access to network printer data for monitoring,
reporting and managing networked printers.
Installs on either IIS or PWS Microsoft Web servers.
Job Accounting
Tracks network printer usage by job, user, or Account ID
for internal reports and bill-back purposes.
Network Printer Status
Creates an additional STATUS tab in the printer
Properties dialog box.
Admin Mgr / Quick Setup
□
Insert the Drivers CD supplied with your printer into
your CD-ROM drive. The CD will AutoPlay. (If it does
not AutoPlay, click Start → Run → Browse.
Browse to your CD-ROM drive and double-click
Install.exe, then click OK.)
□
The Software License Agreement appears. Click Next
and select your language.
Click Network Software → Installation/Config
□
→ Admin Mgr / Quick Setup.
□
Select your language, then click the OkiLAN Softnic
Standard Setup button.
□
Follow the on-screen instructions to complete the
installation.
You can either set up the network while running the
Note:
utility off the CD, or you can choose to install the
utility on your computer and then launch it from
→
there (Start
→
Utility
AdminManager).
Use the Utility to Install the Printer on a
Novell Network
• Novell Client for Windows must be loaded.
• The Admin Manager software must be running.
• You must be logged in to NDS.
□
When the AdminManager utility opens, it
automatically discovers any printers on the network. If
no printers appear, click the Search button (
wait for the utility to discover the printer.
□
Select the discovered printer.
→
□
Click Setup
□
Select NDS Mode. Click Next.
□
Select the container. Click Next.
□
Select Print Server Mode. Click Next.
□
Select or create a queue. Click Execute.
8
→
Programs
Oki Setup
Create a NetWare Queue.
(continued on next page)
) and
Advertisement
Table of Contents
