Start The Tool; Connect Idm Controller With Laptop - TomTom Inductive Distance Measurement Tool Kit II User Manual

 Page 9
•
Then plug the Bluetooth adapter UD100.
Windows recognizes the new hardware
and automatically install the suitable Windows driver
(Windows generic Bluetooth)
•
The Device Manager will show the following:
- Generic Bluetooth Radio
- Microsoft Bluetooth Enumerator
- the not required Bluetooth is down
(indicated by the small arrow at the Bluetooth icon)
Fig. 4.1.1 (Integrated Bluetooth down)
5.

START THE TOOL:

5.1

Connect IDM Controller with Laptop

When the software installation is completed, it starts automatically.
To connect a tool for the first time it has to be paired with the computer.
To do so, follow this sequence:
•
Switch on the IDM2 Controller (green LED).
•
Click on "Tools / Bluetooth Devices / Add a device"
•
Wait until the tool got found
Note: Depending on the search speed of the computer, it might take up to one minute.
•
Select the device, which has to be connected; (here IDM2) and click "OK"
Fig. 5.1.1
(Add Device)
April 4, 2022
The size of the buttons
can be changed here