Page 23
The
green
graph shows the measured values from the radial sensor
The
green
curve is the calculated sinus from the radial readings
The
blue
graph shows the measured values from the axial sensor
The
blue
curve is the calculated sinus from the axial readings
After 2 to 3 kiln revolutions, sufficient data are collected and the measurement can be stopped.
To stop the measurements push the Stop button or [F6].
8.6
Results
The Results are shown as graphs in the graph window and as numbers below.
The radial run-out can also be seen in the radar chart
Measured Points
Centre of Rotation
Centre of Girth Gear
(eccentricity)
Ideal Circle
(with eccentricity)
Measured Points
April 4, 2022