Page 12
April 4, 2022
Change the sampling rate by clicking on the number
Fig. 6.2.3 (Edit Sampling Rate)
Edit Channel
Actual
Click here to
Click on number
Sensor Value
change window
to edit sampling
To add a sensor channel, click the button "Add Channel" (see picture above).
Select an existing scaling or create a new one (as described above)
See the green bar; it indicates the Sensor Value (here; distance between roller surface and
sensor).
6.3
Take Measurements
To start the measurements push the Start button or [F5].
Fig. 6.3.1 (Start Button)
After starting the measurement, the values will appear on the computer screen. Each channel has
its own curve with its own color. The lines can be hided or displayed by clicking to the tick mark.
To stop the measurements push the Stop button or [F6].
To extract the data in to Excel click: "File / Export to Excel..."