Raw Data Acquisition; Purpose; Starting The Software Application - TomTom Inductive Distance Measurement Tool Kit II User Manual

 Page 11
6.

RAW DATA ACQUISITION:

6.1

Purpose

The Raw Data Acquisition is a universal application to measure any kind of value. Either
distances can be measured with the inductive sensors, included in the tool kit or other sensors can
be connected with an output of 0...10V or 0...20mA.
This application is typically used, when measurements have to be taken, where no specific
application is available in the Measurement Studio.
The values are directly displayed in the screen, where different zoom functions can be used.
For further analysis, the data can also be exported to Excel or into other software.
6.2

Starting the Software Application

To start it, click "Projects / Add Raw Data Acquisition"
The computer screen will show the graph window with the empty sensor window below.
Click to add a channel and select the required sensor.
Fig. 6.2.1
(Add Channel)
Fig. 6.2.2
(Select Scaling)
April 4, 2022