Page 24
The following values are calculated and shown as numbers:
Radial:
•
Eccentricity: shows how much the girth gear is out of the center of rotation, it is the
distance between the center of rotation and the center of the girth gear (blue arrow)
•
"Peak at": indicates the angle (purple arrow) where the peak of the eccentricity is located.
It is counted in degrees after F9 was pressed. The position of F9 appears in the radar chart
on top at °0.
•
Roundness Deviation: shows the maximal deviation from the ideal circle. It is a +/- value
(green arrows)
•
Total Run-Out: is the combination of eccentricity with roundness deviation. It corresponds
directly to the measured values. The Total Run-Out is a +/- value (red arrows)
Eccentricity
0°
90°
180°
Axial:
&
Roundness Deviation
270°
90°
0°
270°
180°
April 4, 2022
Total Run-Out
0°
90°
180°
270°