iRobot Roomba Combo j7+ Owner's Manual page 16

Cleaning the Sensors, Camera
Window and Charging Contacts
1
Wipe Sensors, Camera Window and
Pad Shelf with a clean, dry cloth.
Note: Inspect the Camera Window.
If you notice any cracks, please
contact Customer Care.
Important: Do not spray cleaning
solution or water onto the Sensors
or Sensor openings.
Replacing the Bag
1
Lift the canister lid up to open.
2
Pull the plastic card up to remove the
bag from the canister.
Note: This will seal the bag so dust and
debris cannot escape.
3
Discard the used bag.
4
Install a new bag, sliding the plastic card
into the guide rails.
5
Press the lid down, making sure that it is
completely closed.
Note: To achieve optimal performance
with your robot and Automatic Dirt
Disposal, clean and/or replace your
robot's Filter as needed.
Roomba Combo® j7+ Owner's Guide
EN
10