iRobot Roomba Combo j7+ Owner's Manual page 14

Cleaning the Visual Docking
Target and Charging Contacts
1
Inspect the Visual Docking Target
and Charging Contacts to make
sure that they are clear of debris.
Wipe with a clean, dry cloth.
Note: Do not spray cleaning
solution directly onto Sensors
or into Sensor openings.
Cleaning the Full Bin Sensors
1
Remove and empty the Bin.
2
Wipe the inner
Sensors with a
clean, dry cloth
3
Wipe the Bin Door with a clean, dry cloth.
Closed door
Opened door
4
Clear any
debris from the
vacuum path.
Cleaning the Multi-Surface Brushes
1
Pinch the Brush
Frame Release
Tab, lift the Tab
and remove any
obstructions.
2
Remove the Brushes from the robot. Remove
the Brush Caps from the ends of the Brushes.
Remove any hair or debris that has collected
beneath the Caps. Reinstall the Brush Caps.
3
Remove any hair or debris from the square
and hexagonal pegs on the opposite side
of the Brushes.
4
Reinstall the Brushes in the robot. Match the
shape of the Brush pegs with the shape of the
Brush icons in the Cleaning Head module.
Roomba Combo® j7+ Owner's Guide
EN
8