iRobot Roomba Combo j7+ Owner's Manual page 15

Cleaning the Front Caster Wheel
1
Pull firmly on the front Wheel module to
remove it from the robot.
EN
2
Pull firmly on the Wheel to remove it from
its housing (see illustration below).
3
Remove any debris from inside
the Wheel cavity.
4
Reinstall all the parts when finished.
Make sure that the Wheel clicks back
into place.
Housing
Important: A front wheel clogged with hair and
debris could result in damage to your floor. If
the Wheel is not spinning freely after you have
cleaned it, please contact Customer Care.
9 For more information, visit global.irobot.com
Washing the Bin
Important:
Remove the Filter before washing the Bin.
1
Release the Bin, remove the Filter
and open the Bin Door.
2
Rinse the Dust Bin and Water Tank using
warm water.
Axle Wheel
3
Make sure that the Bin is completely dry.
Reinsert Filter and place the Bin back in
the robot.
Do not wash the Filter.
Note:
Bin is not dishwasher safe.
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the Brush.