Wan; Figure 3.7 Interface > Wan > Network Mode; Figure 3.8 Interface > Wan > Network Mode > Static - Advantech EKI-6333AC-1GPO User Manual

Note! All new configurations will take effect after rebooting. To reboot the
device, click Management > Apply Configuration > Apply and
Reboot.
3.4.2

WAN

To access this page, click Interface > WAN.
The Interface screen allows user to setup the WAN interface and its network function
mode.
When WAN Type (Network Mode) is disabled (default), the Interface Setup
configuration settings appear.
The following table describes the items in the previous figure.
Item
Network Mode
WAN Interface
Submit
When WAN Type (Network Mode) is Static, the Static WAN Type configuration
settings appear.
The following table describes the items in the previous figure.
Item
Network Mode
EKI-6333AC-1GPO Series User Manual
Figure 3.7 Interface > WAN > Network Mode
Description
Click the drop-down menu to select the mode type: Disable
(default), Static, DHCP.
Click the radio button to select the a WAN interface (WLAN 2.4G,
or WLAN 5G).
Click Submit to save the values and update the screen.
Figure 3.8 Interface > WAN > Network Mode > Static
Description
Click the drop-down menu to select the mode type: Disable
(default), Static, DHCP.
19