Appendix C Ports And Leds; Ports; Console Port; 10/100/1000Base-T Autosensing Ethernet Port - H3C S5110V2 Series Installation Manual

Appendix C Ports and LEDs

Ports

Console port

The switch provides a serial console port on the front panel.
Table 10 Console port specifications
Item
Connector type
Compliant standard
Transmission baud rate
Services

10/100/1000BASE-T autosensing Ethernet port

Table 11 10/100/1000BASE-T autosensing Ethernet port specifications
Item
Connector type
Interface attributes
Max transmission distance
Transmission medium
Compatible standards

SFP port

CAUTION:
To use a transceiver module with a maximum transmission distance greater than or equal to 80 km
(49.71 miles) on an S5110V2-28P switch, make sure the ambient temperature does not exceed
40°C (104°F).
The switch provides four SFP ports on the front panel.
modules and network cables available for the SFP ports.
Serial console port
RJ-45
EIA/TIA-232
9600 bps (default) to 115200 bps
•
Provides connection to an ASCII terminal.
•
Provides connection to the serial port of a local or remote (through a
pair of modems) PC running terminal emulation program.
Specification
RJ-45
•
10 Mbps, half/full duplex
•
100 Mbps, half/full duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X autosensing
100 m (328.08 ft)
Category-5 (or above) twisted pair cable
•
IEEE 802.3i
•
802.3u
•
802.3ab
28
Table 12 describes the GE SFP transceiver