Numark UPM Operating Manual
Numark UPM Operating Manual

Numark UPM Operating Manual

Dj mixing system

Advertisement

®
Consumer Products Division
The Ultimate Party Machine
DJ Mixing System
OPERATING MANUAL
©1999
Consumer Products Division
http://www.numark.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UPM and is the answer not in the manual?

Questions and answers

Summary of Contents for Numark UPM

  • Page 1 ® Consumer Products Division The Ultimate Party Machine DJ Mixing System OPERATING MANUAL ©1999 Consumer Products Division http://www.numark.com...
  • Page 2: Safety Instructions

    Heat - Avoid placing this product to close to any high heat sources such as radiators. ©1999 Numark Industries g) Ventilation - The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening;...
  • Page 3 Please return the enclosed warranty card to register your unit with us. MODEL: __________________________ SERIAL NUMBER:___________________ ©1999 Numark Industries NOTICE CONCERNING FCC REGULATIONS This equipment generates and uses radio frequency energy and may cause interference to radio and...
  • Page 4: Specifications

    MICROPHONE: 600 ohm dynamic with 1.8m black screen cable fitted with 6.3mm plug. INPUTS: Phono 3mv@47Kohm Line in 100/300mv@100Kohm Microphone 1mv@600 ohm. ©1999 Numark Industries (1) Ultimate Party Machine (1) Owner’s Manual (THIS BOOKLET) (1) Power Adapter (2) Speaker Cables (2) Speakers (LID)
  • Page 5 4. Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your dealer or to an authorized Numark Service Center. ©1999 Numark Industries DJ Mixing System 5.
  • Page 6 Simply unscrew the two large screws which hold it in place, lift it out and disconnect it’s cable. Re-attach the new crossfader and screw the ©1999 Numark Industries mounting plate back onto the unit - you’re back in business! 13.
  • Page 7: Troubleshooting

    POWER switch is set to on Disc play does not start No sound Sound skips ©1999 Numark Industries 6. Now you can switch the power ON. To Play a CD 7. Select the CD1 and CD2 on the input toggles (11).
  • Page 8: Limited Product Warranty

    NUMARK dealer and continuing for the following period of time after that date for (2) Years. The warranty is extended to (3) Years with the completion of the warranty card provided that the warranty card is completed and returned within (30) days from the date of purchase.

This manual is also suitable for:

Ultimate party machine

Table of Contents