Viavi NSC-100 Quick Card User Manual page 2

Network & Service Companion (NSC-100/200)
QUICK CARD
On the Mobile Device:
Go to the Settings menu, enable Bluetooth,
1.
and scan for available devices.
Pair with VIAVI NSC.
2.
Launch the VIAVI Mobile Tech App:
3.
If you are using Stratasync for Asset
1.
and Report Management, tap LOGIN
WITH INSTRUMENT, enter your Tech
ID, and tap LOGIN when prompted.
If you do not use Stratsync, tap LOCAL
2.
MODE.
Press
4.
Press
5.
Companion menu. You can now control the
instrument through the Mobile Tech App and
run all tests on the Companion.
Press to exit Job View.
6.
C O N F I G U R E P R O F I L E
► The following Information is needed to
configure the Ethernet Profile:
• Interface Type (RJ-45 or SFP)
• Autonegotiation (On or Off)
•
Interface Rate
(10M, 100M, 1G, 2.5G, 5G, 10G)
•
Upload Speed Threshold (Mbps)
• Download Speed Threshold (Mbps)
Press
1.
Profile Manager screen.
Press
2.
to create a new profile.
Select New Ethernet Profile and, if prompted,
3.
ACCEPT TERMS OF USE.
Network & Service Companion
to connect to VIAVI NSC.
to view the
to display the
Figure 3: Mobile Tech App
Figure 6: Profile Manager
VIAVI//Public
Figure 4: Companion
Figure 5: Work Order
Figure 7: Create New Profile
2