Viavi NSC-100 Quick Card User Manual page 5

Network & Service Companion (NSC-100/200)
QUICK CARD
R U N T E S T
1. Press
2. Verify Speed and Autonegotiation settings:
► For 1G RJ45 interfaces, verify the following:
o Speed is 1 Gbps
o Auto-Negotiation is On.
► For Multigig Electrical SFP interfaces, verify that
Speed and Auto-Negotiation match the port under test.
► For Optical Interfaces, verify the following:
o Tx Power is within the limits of the port under test.
o Rx Power is within the limits of the SFP in the NSC.
If necessary, insert optical attenuators into the SFP TX
and/or RX ports.
3. When the test completes, verify that all results pass
and that Download and Upload speeds meet or exceed
pass/fail thresholds.
4. Tap to view additional Speedtest Results.
Figure 15: Multigig Electrical SFP Results
© 2023 VIAVI Solutions, Inc,
Product specifications and descriptions in this
document are subject to change without notice.
Network & Service Companion
Patented as described at viavisolutions.com/patents
Figure 16: Optical SFP Results
VIAVI//Public
Figure 14: 1G RJ45 Results
Figure 17: Expanded view
+1 844 GO VIAVI
Contact Us
(+1 844 468-4284)
To reach the VIAVI office nearest you,
visit viavisolutions.com/contact