Brita MAXTRA PRO Instructions For Use Manual page 5

Lid with non-removable BRITA Memo J
Please clean the lid by hand, as it is not dishwasher safe!
Preparing the MAXTRA PRO water filter B
2
Fill the clean jug with cold water.
Immerse the water filter and shake slightly to remove any excess
air. Remove the water filter and pour away the water in the jug.
Done!
Inserting the MAXTRA PRO water filter C
3
The BRITA PerfectFit System has been developed to create a
perfect fit and seal between the MAXTRA PRO water filter and the
funnel.
Insert the funnel into the jug and place the water filter firmly in
the funnel. Please push the water filter further downwards if the
water does not flow through. BRITA can only guarantee optimum
filtration if BRITA MAXTRA PRO water filters are used.
The BRITA PerfectFit System is not included in BRITA Flow.
Filling the BRITA water filter jug D E
4
The water in the funnel is filtered automatically and flows into the
jug.
How the jug is filled will depend on the model or the type of lid.
Activating the MAXTRA PRO water filter F
5
For optimal taste and performance please allow two full funnels of
tap water to pass through the filter before drinking.
To join BRITA in considering the environment, you can use this
filtered water to water your plants, for example.
Setting the water filter exchange indicator
6
How handy! The BRITA water filter jug will tell you when you need
a new water filter.
There are different exchange indicators for this in the lid:
BRITA Smart Light G H I
Its intelligent sensor not only measures the time since the water
filter was last replaced, but also records the volume of filtered
water.
Before using the jug for the first time (and after every time you
change the water filter), press the BRITA Smart Light reset button
for approx. 5-10 seconds until the LED indicator flashes green
three times.
The jug is now ready to use.