Table of Contents
Advertisement
36
GETTING TO KNOW YOUR INSTRUMENT PANEL
What to do when an electrical load reduction action
message is present ("Battery Saver On" or "Battery Saver
Mode")
During a trip:
Reduce power to unnecessary loads if possible:
Turn off redundant lights (interior or exterior)
Check what may be plugged in to power outlets
+12 Volts, 115 Volt AC, USB ports
Check HVAC settings (blower, temperature)
Check the audio settings (volume)
After a trip:
Check if any aftermarket equipment was installed
(additional lights, upfitter electrical accessories, audio
systems, alarms) and review specifications if any
(load and Ignition Off Draw currents).
Evaluate the latest driving cycles (distance, driving
time and parking time).
The vehicle should have service performed if the
message is still present during consecutive trips and
the evaluation of the vehicle and driving pattern did not
help to identify the cause.
WARNING LIGHTS AND MESSAGES
The warning/indicator lights will illuminate in the
instrument panel together with a dedicated message and/
or acoustic signal when applicable. These indications are
indicative and precautionary and as such must not be
considered as exhaustive and/or alternative to the
information contained in the Owner's Manual, which you
are advised to read carefully in all cases. Always refer to
the information in this chapter in the event of a failure
indication. All active telltales will display first if applicable.
The system check menu may appear different based upon
equipment options and current vehicle status.
Some telltales are optional and may not appear.
R
W
L
ED
ARNING
IGHTS
Hybrid Electric Vehicle System Service
Warning Light
This warning light will illuminate when service
to the hybrid electric system is needed. It will be
accompanied by a "Service Hybrid Electric
Vehicle System" warning message in the
cluster. If the telltale stays on or continues to come on,
contact an authorized dealer as soon as possible.
Hide quick links:
Advertisement
Table of Contents
