Ignition Switch - Chrysler PACIFICA HYBRID 2023 Manual

20 GETTING TO KNOW YOUR VEHICLE
 If the vehicle is turned off outside of the charging
window, a radio pop-up message will be displayed,
which provides an option to begin charging the vehicle
immediately. The pop-up message asks the driver if
they would like to "Charge Now?" and provides other
information, including the next charging schedule start
time and estimated time to charge the battery to 100%.
If within one hour of selecting "Yes," the vehicle is
connected to a powered EVSE, the vehicle will immedi-
ately begin to charge (temporarily ignoring any set
charge schedule). To fully deactivate the charge
schedule, refer to the "Schedules" feature within the
Hybrid Electric App.
 The charging schedule can also be overridden if an
EVSE is plugged in, unplugged, and then plugged in a
second time to the vehicle. This "double plug
sequence" will override the schedule that is set in the
radio, and begin charging the vehicle immediately.
The double plug sequence must be completed within
10 seconds for it to override the programmed
schedule.
 If "Charge Until Full" is selected, and the vehicle is
plugged in after the start time of the schedule, the
vehicle will start charging when it reaches the start
time the next day. If you would like to begin charging
immediately, and continue charging until the vehicle is
fully charged, you can select the "Charge Now" option
or use the double plug override option.
NOTE:
For information on jump starting your vehicle, refer to the
"In Case Of Emergency" chapter in the Owner's Manual.

IGNITION SWITCH

This feature allows the driver to operate the ignition switch
with the push of a button as long as the key fob is in the
passenger compartment.
NOTE:
This vehicle is equipped with an automatic shutdown
feature. If the vehicle is left in READY state (vehicle
running) with the gear selector in the PARK position for
30 minutes, it will automatically turn off the vehicle. Noti-
fications have been designed into this feature to raise
awareness of the timed event. The instrument cluster
display will display "Ready To Drive" accompanied with
three audible chimes while exiting. The interior warnings
will occur regardless of whether the key fob remains in the
vehicle or is removed. The horn will sound three times if
the fob is removed from the vehicle and the ignition state
is in READY mode. To restart the vehicle, follow the normal
process for starting your vehicle.
The START/STOP ignition button has four operating
positions; three of which are labeled and will illuminate
when in position. The three positions are OFF, ACC, and
ON/RUN. The fourth position is START. During START, RUN
will illuminate.
NOTE:
 Pushing the START/STOP ignition button may only acti-
vate the Electric Propulsion System and not start the
vehicle's engine (if running the engine is not currently
required by the Hybrid system). READY will show in the
instrument cluster display whenever the vehicle is
operating in Electric mode and the vehicle is stationary.
 If the vehicle's ignition is in either ACC or ON/RUN, the
vehicle charge indicator may not display a value
greater than 99% state of charge due to vehicle loads.
Keyless Push Button Ignition
1 — OFF
2 — ACC
3 — ON/RUN
The ignition can be placed in the following positions:
OFF
 The vehicle is stopped
 Some electrical devices (e.g. power locks, alarm
system, etc.) are still available
ACC
 Some electrical devices are available
(e.g. power windows)
 Mechanical power (vehicle propulsion) is not available