Custom Grille Panels And Specifications - Northland 18AF-SB Installation, Operation And Maintenance Instructions

CUSTOM GRILLE PANELS AND SPECIFICATIONS

Custom Grille Panels
CAUTION
Grille panels MUST NOT exceed 20 lbs. Panels
weighing more than 20 lbs. may cause product dam-
age.
For grille installation refer to page 11, Grille Assembly
Installation, and see separate Instruction Sheet, No.
31395-000.
For models:
All Refrigerator (AR), All Freezer (AF), Top Freezer (TF), Side-by-Side (SS), and Side-by-Side 3 Door (3D)
Model AR
18AR Grille Panel
24AR Grille Panel
30AR Grille Panel
36AR Grille Panel
Model AF
18AF Grille Panel
24AF Grille Panel
30AF Grille Panel
36AF Grille Panel
Model TF
18TF Grille Panel
24TF Grille Panel
30TF Grille Panel
36TF Grille Panel
Model SS
36SS Grille Panel
42SS Grille Panel
48SS Grille Panel
54SS Grille Panel
60SS Grille Panel
66SS Grille Panel
72SS Grille Panel
Model 3D
363D Grille Panel
14
H W
8 9/16" 14 13/16"
8 9/16" 20 13/16"
8 9/16" 26 13/16"
8 9/16" 32 13/16"
H W
8 9/16" 14 13/16"
8 9/16" 20 13/16"
8 9/16" 26 13/16"
8 9/16" 32 13/16"
H W
8 9/16" 14 13/16"
8 9/16" 20 13/16"
8 9/16" 26 13/16"
8 9/16" 32 13/16"
H W
8 9/16" 32 13/16"
8 9/16" 38 13/16"
8 9/16" 44 13/16"
8 9/16" 50 13/16"
8 9/16" 56 13/16"
8 9/16" 62 13/16"
8 9/16" 68 13/16"
H W
8 9/16" 32 13/16"
• Remove screws and handle.
• Slide custom panel into position in door trim
opening.
• Do ALL doors.
• Do NOT replace handle until hinge and gasket
adjustments have been made. See page 12.
• Replace handle and screws and install plastic
screw caps provided.
W
H
NOTE: All center hinged doors CANNOT exceed 1/2
inch in panel thickness from the door trim face.
1/4" Max.
3/8"
Min.
Note: 1/2" Min. (Relief)