Installing The Grille Assembly - Northland 18AF-SB Installation, Operation And Maintenance Instructions

INSTALLING THE GRILLE ASSEMBLY

Edge of Cabinet
Grille Top Trim
2.06" from inside of
cabinet top trim to
centerline of holes.
Bottom of grille
shown behind top
trim. See Note #4.
Cabinet Top Trim
GRILLE MOUNTING - STYLE II
SCREW
Facia
Instructions for Installing Grille Mounting (STYPE III) Spring
1. Remove screw A in mounting bracket. Mount L-bracket with screw A.
2. Hook one end of spring (81050-000) through hole in L-bracket. Holding the facia in position -
stretch the spring and secure the hook end to the facia through a square top hole in the facia.
10
GRILLE MOUNTING - STYLE I BRACKET
3.81"
2.00"
See Note #2.
Instructions for Installing Grille Brackets
1. Use the two (91180-000) screws to secure each bracket to the cabinet top.
2. Loosen the screws at the top of the mounting bracket. Leave .13 inches (2-3 screw
threads) sticking through the bracket.
3. Install the grille by aligning the screws in the top of the bracket with the slots in the
grille top trim.
4. Grille is installed when bottom of the grille fits behind the cabinet trim across the
front.
5. Pull grille forward about an inch at the top and retighten the screws in the top of the
bracket.
Fasten top of grille to enclosure
with screw provided. Cover
screw head with snap-on cap.
Grille Back
Facia Bracket
.45" typ. (ref.)
Drill four (4) holes 7/64" (.109) dia.
Mounting Brackets
(91180-000) # 8 - 5/8 P .H. Screws
See Note #1.
GRILLE MOUNTING - STYLE II SPRING
Module
Spring
(81050-000)
Kappet Screw
(into enclosure)
Screw Cap
24", 30" & 36" wide units will use
one (1) spring (81050-000) and
one (1) L-bracket (30483-000) to
secure the facia.
L-Bracket
(30483-000)
Anti-Tip
Bracket
Screw A
42" & 48" wide units
will use two (2) springs
(81050-000) and two (2)
L-brackets (30483-000) to
secure the facia.