Installing The Ice Maker - Northland 18AF-SB Installation, Operation And Maintenance Instructions

INSTALLING THE ICE MAKER WATER VALVE
Solenoid
Water Valve
Garden Hose
Fitting Gasket
Compression
Nut
Copper Tubing
(by customer)
8
Sleeve
Tube Clamp (2)
Ice Maker (Solenoid) Connection
Slip solenoid valve compression nut and
compression sleeve on copper tubing
as shown in diagram. Tighten nut onto
water valve with adjustable wrench. Turn
on water supply valve. Check fittings
for leaks. Clamp ice maker line from
cabinet onto solenoid valve as shown.
Tighten clamp securely.
Fill hose to ice maker.
This clamp for tube positioning only.
Check to make sure tube is not col-
lapsed or restricted after connecting
opposite end to valve.