Using The Setup Menu - NorthStar 1201 Owner's Manual

Using the Setup Menu

The Setup Menu is used to configure the display. The 1201 and
1202 have different Setup Menus. Follow the steps below for
your specific model.
NOTE:
Always make note of a setup value be-
fore changing it. Then if you don't like
!
the change, you can restore the previous
setting.
The Setup Menu will disappear by itself after a certain amount of
time. This time can be set in both the 1201 and the 1202.
The 1201 uses a line-based Setup Menu. When making
1201
adjustments, simply press
Use the up and down arrows on
eter you wish to modify and press
value. When you have finished making changes, press and hold
once again to exit the Setup Menu.
MENU
Please read Setup Menu details carefully as it
is possible to misadjust the display and ad-
versely affect display quality.
The 1202 uses an icon-based Setup Menu. To activate
1202
it, press
MENU
icons. One of these icons is highlighted. This high-
lighted icon represents the set of parameters to be modified. To
advance to the next icon, press
Once at the desired icon, use the up and down arrows on
select the parameter you wish to modify. Then use
to change the value or setting of that item. To exit the
VIDEO
menu, press and hold
Page 8 — Using the Setup Menu
to activate the menu.
MENU
and
DATA
once. The menu appears as two rows of
.
MENU
until the menu disappears.
MENU
1200 Series Display, Rev. A2
to select the param-
to adjust the
VIDEO
to
and
DATA