The Power Button; The Brightness Control; The Data Button; The Video Button - NorthStar 1201 Owner's Manual

The POWER Button

This key turns the display (and vBox, if connected) on and
PWR
off. You must hold it for a few seconds to turn the display
off. This delay prevents accidental shutoffs.

The Brightness Control

Press the up arrow to make the screen brighter. Press the
down arrow to make the screen dimmer.

The DATA Button

Displays the VGA data source connected to the DATA
DATA
input. This key is also used in the Setup Menu to make
choices and adjust various values lower.
If the optional vBox is installed, repeated presses of this key will
alternate between the primary and auxiliary data input.

The VIDEO Button

Displays the NTSC/PAL video source connected to the
VIDEO
VIDEO input. This key is also used in the Setup Menu to
make choices and adjust various values higher.
If the optional vBox is installed, repeated presses of this key will
alternate between the primary and auxiliary video input.

The RED Button

The Red Mode feature is available only when the
RED
optional vBox is connected and affects only Data. This
mode does not alter Video.
Page 6 — Front Panel 1200 Series Display, Rev. A2