The Hi/Lo Button; The Menu Button - NorthStar 1201 Owner's Manual

Red Mode turns data images to a reddish hue, both in Hi and Lo
mode. This is particularly useful for running at night when your
navigator is displayed on your 1201/1202. Press again to turn off.

The HI/LO Button

This feature is available only when the optional vBox is
HI/LO
connected. It selects a day (Hi) or night (Lo) range of the
displayed data or video image. Lower intensity images are more
useful at night.

The MENU Button

This button configures picture quality settings in your
MENU
display. Since changing these settings can degrade your
picture quality, Northstar recommends that you don't adjust the
factory settings.
1201
Northstar ships your 1201 pre-adjusted for the
1201
maximum video quality. Only in rare cases will
further adjustment be necessary. If you are experi-
encing problems with image quality, follow the guidelines in
the section on troubleshooting beginning on page 38.
1202
1202 users will use
1202
Picture-In-Picture (PIP) feature on and off as
described on page 4.
is also used for adjusting image quality. Only in rare
MENU
cases will adjustment be necessary. If you are experiencing
problems with image quality, follow the guidelines in the
section on troubleshooting beginning on page 38.
1200 Series Display, Rev. A2
primarily to turn the
MENU
Front Panel — Page 7