Appx. 1 Menu Items - Furuno VR-7000 Operator's Manual

APPX. 1 MENU ITEMS

Below are the menu items for the Remote Alarm Panel (RAP). To open this menu, press the
MENU/ESC key.
Menu item
Execute SAVE Function
(only for VR-7000S)
Serial Monitor
Sensor(LAN) Monitor
Analog Monitor
Digital Monitor
Image Capture Status
Audio Monitor
Life Parts List
Status Monitor
Settings
Records the data, which are recorded to the capsule, to area1 (or 2, 3, 4)
in the long term device(s)
Displays the sensor information input to the serial channels on the Serial
Monitor screen.
Displays the sensor information input to the LAN channels on the Sensor
(LAN) Monitor screen.
Displays the sensor information input to the analog channels on the Ana-
log Monitor screen.
Displays the sensor information input to the digital channels on the Digital
Monitor screen.
Displays the information of the images recorded in the DCU on the Image
Capture Status screen.
Displays the status of the microphones and communications equipment
(VHF, etc.) on the Audio Monitor screen.
Displays the lifetimes of the parts on the Life Parts List screen.
Displays the status of the system on the Status Monitor screen.
• Key Beep: Turns key beep on or off. (ON, OFF)
• [Brilliance Sync]: Turn the brilliance sharing function on or off. (ON,
OFF)
• [Brilliance Sync Settings]: Adjust the preset setting value for the bril-
liance sharing.
• Serviceman Settings: No use.
Function
AP-1