Advertisement
3. Keyboard
3.8. Quick settings
When in normal image mode, the following quick settings are avail-
able as shortcuts:
3.8.1. TIC camera
When a TIC camera is selected and button 2 (Figure 12) is pressed,
then Color LUT and DDE quick settings are enabled (indicated by
illuminated button 2). Using the minus button (button 6), the Color
LUT settings (WHO, BHO, FUS, RB, I&F) can be selected (see
Figure 11). Using the plus button (button 7), the DDE settings (OFF,
LOW, MED, HI) can be selected.
If button 2 (Figure 12) is pressed for more than 3 seconds, then the
TIC camera performs a FFC (Flat Field Correction) cycle.
3.8.2. AFZ camera
If an AFZ camera is selected and button 2 is pressed (Figure 12),
then the zero lux and backlight functions of the AFZ camera are
enabled/disabled.
3.8.3. CCC camera
If a CCC is selected, then pressing button 2 (Figure 12) switches
between all backlight settings for the entire system (DAY, NIGHT,
ABC). See section 3.2.
UM0972011 A 01
Figure 10
1
Button
Figure 11
1
Button
2
Button
Figure 12
3
Button
Butt
9
Advertisement
