Advertisement
4. Service menu
4.3.7. Scanning
This option opens the camera scanning submenu. See Figure 31.
This menu has the following options:
Scan sequence
This option selects the cameras from which images
are to be shown in sequence.
Scan interval
This option selects how long a camera image is displayed.
4.3.8. Camera switch
This option configures the type of video
switch that is used. See Figure 32.
'OFF' if no camera switch is used →
1 camera system.
'3C' for an external
camera switch → 3 camera system.
'2C' if a 2–4 camera cable is used →
2 camera system.
'4C' if a combination of internal and external switches and a 2–4
camera cable are used → 4 camera system.
'QUA' for a quad system, only in combination with the quad
switch.
4.3.9. Front camera
See Frontcam manual 0993850. This option opens the front camera
submenu for the 7" RLED display. This enables the front camera
functionality (a statutory obligation).
4.3.10. Default settings
This option opens the menu to restore the factory default settings.
Select the number of the factory settings that you require (1 =
default Orlaco settings). You can choose between 16 sets of default
settings. Contact ORLACO for further information. Select the option
'Restore defaults' to restore the factory settings.
Warning:
All user settings are lost when the factory defaults are restored!
4.3.11. External device configuration
This option opens the configuration menu for an external device.
Only use this option if a device is connected that has its own OSD
(Multiview, Spectrum Scanner, etc.). Exit the menu by pressing the
option button (5) for 3 seconds.
4.4. Info
This user manual describes the functions of the software version
indicated on this display (see Figure 35).
UM0972011 A 01
Figure 31
Figure 32
Figure 33
Figure 34
Figure 35
15
Advertisement
